Nortel Networks BCM200/400 User Manual
Page 30
30
Chapter 1 Getting started
N0060612
N0060612
These conventions and symbols are used to represent the Business Series Terminal display and
dialpad.
These text conventions are used in this guide to indicate the information described:
!
Security Note: Indicates a point of system security where a default should be
changed, or where the administrator needs to make a decision about the level of
security required for the system.
Warning: Alerts you to ground yourself with an antistatic grounding strap
before performing the maintenance procedure.
Warning: Alerts you to remove the BCM main unit and expansion unit power
cords from the AC outlet before performing any maintenance procedure.
Convention
Example
Used for
Word in a special font (shown in
the top line of the display)
Pswd:
Command line prompts on display telephones.
Underlined word in capital letters
(shown in the bottom line of a
two-line display telephone)
PLAY
Display option. Available on two-line display
telephones
.
Press the button directly below the
option on the display to proceed.
Dialpad buttons
£
Buttons you press on the dialpad to select a
particular option.
Convention
Description
bold Courier
text
Indicates command names and options and text that you must enter.
Example: Use the
info
command.
Example: Enter
show ip
{alerts|routes}
.
italic text
Indicates book titles.
plain Courier
text
Indicates command syntax and system output (for example, prompts
and system messages).
Example:
Set Trap Monitor Filters
FEATURE
HOLD
RELEASE
Indicates that you press the button with the coordinating icon on
whichever set you are using.