Nortel Networks BCM200/400 - Manual (Page 206)

206 Chapter 16 Using Element Manager to set the basic parameters
N0060612 N0060612
5 Click Install.
Configuring the startup parameters
Use the following procedures to configure the startup parameters for the BCM system using
Element Manager:
• “To enter a name for your system”
• “To configure the date and time settings”
• “To configure DHCP server settings”
• “To configure IP Phones” on page 208
• “To configure SNMP settings” on page 209
• “To configure SNMP community strings” on page 210
• “To configure the SNMP manager list” on page 210
• “To create user accounts” on page 211
To enter a name for your system
1 From the Configuration tab, click the System folder to expand it.
2 Select Identification from the System folder.
3 Enter a name for your system in the System name field.
To configure the date and time settings
1 From the Configuration tab, click the System folder to expand it.
2 Select Date and Time. The Date and Time panel opens.
To Line Enter the line number of the last line in the range of lines you want CallPilot to
answer.
Number of rings Enter the number of rings you want CallPilot to wait before answering lines.
Table 71 Quick Install Wizard attributes
Attribute Description