RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) - Manual (Page 99)

CAMERA AND LENS STATUS
To set up what camera and lens info displays as part of the overlay, go to Menu > Overlays > Status .
CAMERA STATUS OVERLAYS
EXPOSURE
Shutter Speed : Displays the exposure time in seconds (1/xx sec). When you change the frame rate in this mode,
the shutter speed stays the same, but the shutter angle changes. (Default)
Shutter Angle : Displays the exposure as an angle (1° to 360°). When you change the frame rate in this mode, the
shutter angle stays the same, but the shutter speed changes.
POWER
Current Batt % : Displays the remaining percentage of active battery. (Default)
Total Time : Displays the total run-time left of battery power, taking into account all available batteries.
Voltage : Displays the voltage.
VU METER
Input : Displays levels of audio inputs (pre-mixer). (Default)
Output : Displays levels of audio outputs (post-mixer).
HISTOGRAM
NOTE: The Histogram setting is disabled on Monochrome cameras.
RGB : Displays red, green, and blue channels on histogram. (Default)
Luma : Displays luma channel on histogram.
MEDIA
Percentage : Displays media space remaining as a percentage. (Default)
Time Remaining : Displays media space remaining as time in hours and minutes (HHH:MM).
LENS STATUS OVERLAYS
APERTURE INCREMENTS
1/4 Stop : Aperture increments in 1/4 stops.
1/3 Stop : Aperture increments in 1/3 stops. (Default)
FOCUS DISTANCE
Metric : Displays lens focus distances in meters.
Imperial : Displays lens focus distances in feet and inches. (Default)
MOTION MOUNT ND AND MOTION MOUNT ISO PULL
Only applicable when using a DSMC RED MOTION MOUNT ® S35 lens mount. For more information, see the RED
MOTION MOUNT Operation Guide , available at www.red.com/downloads .
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M | 9 9
DSMC2 HELIUM OPERATION GUIDE