Dsmc2 helium operation guide, Ctrl (rs232 control) – RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) User Manual
Page 233
CTRL (RS232 CONTROL)
The following devices feature a CTRL connector:
DSMC2 Base Expander
DSMC2 V-Lock I/O Expander
DSMC2 Jetpack Expander
DSMC2 Jetpack-SDI Expander
DSMC2 REDVOLT Expander
DSMC2 Production Module
The 4- Pin 00B CTRL Connector supports RS232 remote control for 3D camera communication and third- party
metadata ingest applications. For more information, go to
.
The General Purpose Out (GPO) tally presents 3.3 V at a maximum of 0.04 A between pins 1 and 3. When used as a
record tally, the rising edge of the pulse indicates start of record, falling edge represents end of record.
For more information about controlling the camera via RS232, download the
, available at
.
Figure: Front Face of the CTRL (RS232) Connector (Looking at the Camera)
4-PIN 00B CTRL CONNECTOR
PIN
SIGNAL
DESCRIPTION
DIRECTION
1
GROUND
Common ground
N/A
2
232 RX
RS232 RX
In
3
SS/GPO
Shutter sync/general purpose output
Out
4
232 TX
RS232 TX
Out
NOTE:
Mating connector is FGG.00.304.CLAD.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M
|
2 3 3
DSMC2 HELIUM OPERATION GUIDE