Dsmc2 helium operation guide – RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) User Manual
Page 248
4. Depending on the lens mount, you may need to turn the locking ring slightly counter-clockwise so that you can
access the lens mount screws.
Figure: Turn Locking Ring Counter-Clockwise
5. Loosen and remove the four (4) M4x0.7 x 8 mm lens mount screws in a cross pattern (“X” pattern) using a T20
TORX driver.
NOTE:
Some lens mounts have captive screws that are not removable.
NOTE:
Screw removal may require a large handle T20 TORX driver and additional leverage.
Figure: Remove the Lens Mount Screws
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M
|
2 4 8
DSMC2 HELIUM OPERATION GUIDE