RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) - Manual (Page 227)

MON-1
The DSMC2 Production Module features a MON-1 out port. The DSMC2 Production Module converts an 8-bit RGB
HDMI signal to a 10-bit 4:2:2 SDI feed, which is available via the MON-1 port. Due to this conversion, the color depth
of the signal is limited to 8-bit.
The MON-1 port provides an additional monitor feed that is separate from the SDI-1 and SDI-2 cloned feeds.
The MON-1 output provides the formats described in the table below:
MON-1 OUTPUT FORMATS 1
VIDEO FEED 2 FREQUENCY (HZ) 3
720p 50.00, 60.00
1080p 24.00, 25.00, 30.00, 50.00, 60.00
1. Ensure that you select a frequency supported by your monitor.
2. The output is progressive scan (p); it does not support progressive segmented frame (PsF) or interlaced (i) scan formats.
3. Supports only non-drop frame frequencies.
75 OHM BNC CONNECTOR
PIN SIGNAL DESCRIPTION DIRECTION
Center SDI SDI out Out
Shield/Screen GROUND Camera ground N/A
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M | 2 2 7
DSMC2 HELIUM OPERATION GUIDE