RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) - Manual (Page 137)

FOCUS MENU
To access the Focus menu, go to Menu > Settings > Focus .
The Focus menu includes: Mode and Rack.
MODE TAB
Use the Mode tab to select a focus setting. To set up focus, follow the instructions below:
1. Go to Menu > Settings > Focus > Mode .
2. Select a mode from the Mode drop-down menu. For more information, go to "Mode" below .
3. Select a zone/target from the Zone drop-down menu. For more information, go to "Zone/Target" below .
4. If using Spot, select a size from the Size drop-down menu. For more information, go to "Size" below .
5. Select a confirm style from the Confirm menu. For more information, go to "Confirm Style" below .
MODE
Select an option from the Mode drop-down menu:
Manual : Enables manual focus. Disables all other settings in the Focus menu.
Confirm : Enables a focus target, which changes color to indicate if the subject in the target is in focus. After
selecting Confirm, set up the target type (zone), size, and confirm style. Inadequate lighting and/or contrast may
decrease the performance of Confirm mode.
Single, Continuous, Touch Track, Rack : For more information, go to "Use Autofocus Modes" on the next page .
ZONE/TARGET
Select an option from the Zone drop-down menu:
Center : A large square centered in the recording area.
Spot : A small target for precise focus that you can move around the recording area. Select a size for the target
from the Size drop-down menu. For information on how to move the Spot target, go to "Move the Spot Focus
Target" on the next page .
SIZE
Select a size for the Spot target from the Size drop-down menu.
CONFIRM STYLE
Select a confirm style from the Confirm Style drop-down menu.
STYLE DESCRIPTION OBJECT IN FOCUS OBJECT OUT OF FOCUS
None Square target Target is yellow or green Target is red
Circle Yellow circle around a
square target Target is yellow or green; circle is almost the
same size as the square Target is red; circle gets bigger
Bar Bar target Target is yellow or green; vertical bar on the
right side is filled up Target is red; vertical bar on the left
side is almost empty
Pie Pie target Target is yellow or green; line around the
curve is filled up Target is red; line around the curve
is almost empty
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M | 1 3 7
DSMC2 HELIUM OPERATION GUIDE