Dsmc2 helium operation guide, Self-test – RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) User Manual
Page 155

SELF-TEST
The Self-Test menu includes: Enable/Disable Sensor Test Pattern and Touchscreen.
ENABLE/DISABLE SENSOR TEST PATTERN
The Sensor Test Pattern is used during manufacturing and stress testing. For more information, go to
. The Sensor Test Pattern is a white screen with vertical lines.
To enable/disable the sensor test pattern, go to
Menu
>
Settings
>
Maintenance
>
Self-Test
>
Enable/Disable
Sensor Test Pattern
.
TOUCHSCREEN
To perform a touchscreen self-test, follow the instructions below:
1. Go to
Menu
>
Settings
>
Maintenance
>
Self-Test
.
2. Select
Touchscreen
.
A grid of green squares displays on the touchscreen.
3. Touch each box with your finger.
Each green box turns blue.
4. To exit the self-test, perform one (1) of the following actions:
Touch all of the boxes, so that they are all blue.
Press and hold the touchscreen.
Press the
Enter
or
Menu
button on the DSMC2 SIDEKICK.
Figure: Self-Test Menu
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M
|
1 5 5
DSMC2 HELIUM OPERATION GUIDE