Dsmc2 helium operation guide, Setup, Keys – RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) User Manual
Page 142

SETUP
The Setup menu includes: Keys, Date/Time, Communication, GPIO/Sync, Fan Control, Lens, and Motor Control.
KEYS
Map keys to often-used actions to easily control the camera. For a full list of the default key mappings, go to
NOTE:
If using a third-party module, the default GPI functions may match the inputs offered by the module (instead of
the RED defaults).
KEY MAPPING
To map or remap a user key:
1. Press the user key that you want to map.
2. Select an action from the
Press
(or
CCW
) drop-down menu that you want to map to the user key.
3. To un-map a key, select
-Key Disabled-
from the drop-down menu.
4. If you want, map a
Release
or (
CW
) action to the key.
A Release action occurs when a pressed key is released.
OPTIONS
Lock Side Module keys
: None of the module keys perform any actions when pressed, unless you set up the
exceptions below:
Record key remains active when locked
Navigation keys remain active when locked
Show key action notifications
: A notification displays on the bottom of the display when you perform an action
mapped to a key.
Enable Side Handle focus contro
l: Enables the Focus Control Wheel on the DSMC2 Side Handle. For more
information, go to
"DSMC2 Side Handle" on page 78
.
Figure: Key Options
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M
|
1 4 2
DSMC2 HELIUM OPERATION GUIDE