RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) - Manual (Page 247)

C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M | 2 4 7
DSMC2 HELIUM OPERATION GUIDE
APPENDIX D:
LENS MOUNTS AND LENSES
LENS MOUNTS
This section describes camera lens mounts. Camera mounts may be configured with 19mm rods to accommodate
most cinematography lenses, matte boxes, and follow focus systems.
WARNING: All lenses are hot swappable. However, lens mounts are NOT HOT SWAPPABLE, meaning you cannot
remove or install lens mounts while the camera is turned on. Before installing or removing lens mounts, you MUST turn
off the camera. Failure to do so may result in damage to the lens mounts or camera that is not covered under
warranty.
DSMC RED MOTION MOUNT
The DSMC RED ® MOTION MOUNT ® S35 lens mount is a revolutionary and adjustable lens mount system for your
camera. By integrating a global shutter, temporal anti-aliasing soft shutter, and variable neutral density (ND) system
into a single lens mount, the DSMC RED MOTION MOUNT S35 lens mount delivers on-the-fly shutter adjustments to
reduce motion blur and temporal aliasing. The ND filter also includes a linear polarizer and IR filter for improved image
color and contrast.
For more information, see the MOTION MOUNT Operation Guide , available at www.red.com/downloads .
NOTE: HDRX is not availabe when the MOTION MOUNT Shutter Type is set to Soft or Square.
REMOVE A LENS MOUNT
NOTE: You can change lens mounts in the field. However, RED ® recommends that you change lens mounts only in a
dust-free environment.
REQUIRED TOOL(S): T20 TORX ® driver
1. Turn off the camera.
2. Attach the camera to a stable platform or position the camera on a clean and level work surface so that the lens
mount screws are accessible.
3. Remove the lens and any devices, cables, or other accessories that might interfere with removing the lens mount.