RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) - Manual (Page 88)

MONITORING MENU
The Monitoring menu includes tools that control different monitor outputs, Look Around, and overlays.
MONITORS
To set up monitor preferences, go to Menu > Monitoring > Monitors and select the monitor whose preferences you
want to change. You can set up preferences for each of the following monitors:
LCD Top
EVF Top
LCD Left
EVF Left
HDMI ® (only available when an HDMI port is connected to the system)
HD-SDI (only available when an HD-SDI port is connected to the system)
MON-1 (only available with the DSMC2 Production Module)
SDI-1/2 (only available with the DSMC2 REDVOLT Expander and DSMC2 Production Module)
To see what monitor preferences are available, go to "Monitor Preferences" below .
MONITOR PREFERENCES
Set up the preferences for the selected monitor. Some options are only available with specific monitors.
NOTE: While some changes take effect immediately, others take effect when you close the menu.
LCD/EVF LEFT / HDMI SELECT
NOTE: This setting is available for the LCD Left, EVF Left, and HDMI.
NOTE: HDMI ports are only available on select DSMC2 expanders. For more information, go to to "Input/Output
Connectors" on page 218 .
Select to enable either the secondary LCD/EVF port on the camera or the HDMI port on an expander. The secondary
LCD/EVF port and the HDMI port cannot be used at the same time.
LCD/EVF LEFT / MON-1 SELECT
NOTE: This setting is available for LCD Left, EVF Left, and MON-1 when a DSMC2 Production Module is attached.
Select to enable either the secondary LCD/EVF port on the camera or the MON-1 port on the DSMC2 Production
Module. The secondary LCD/EVF port and the MON-1 port cannot be used at the same time.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M | 8 8
DSMC2 HELIUM OPERATION GUIDE