Dsmc2 helium operation guide – RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) User Manual
Page 147

6. Select
Scan
to search for available wireless networks.
The available wireless networks (access points) display.
7. Highlight the wireless network that your device is connected to and select
Select
.
Figure: Select Wireless Network
8. If you select an encrypted network, follow the instructions below to enter the passphrase for the network:
A. Select a security option from the
Encryption
drop-down menu.
B. Tap or select the
Passphrase
text box.
C. Type the passphrase to access the network.
D. Select
OK
.
9. To enable/disable DHCP, select
IP Config
and set up the IP settings. For more information on configuring DHCP
and IP settings, go to
10. Select
Connect
at the bottom of the WiFi screen.
The IP address of the access point displays at the bottom of the WiFi screen after the camera connects to the
access point.
Figure: Select Connect
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M
|
1 4 7
DSMC2 HELIUM OPERATION GUIDE