beautypg.com

Dsmc2 helium operation guide, Anamorphic – RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) User Manual

Page 123

background image

ANAMORPHIC

Select an

Anamorphic

setting, if applicable. The anamorphic setting de-squeezes the image on the monitor and

marks the footage as anamorphic in the clip metadata. When you open the clip in REDCINE-X PRO, the program
automatically de-squeezes the image. The available anamorphic settings depend on your camera type.

The camera supports anamorphic 1.3x and 2x with each format.

The camera also supports anamorphic 1.25x for 6K full format and 8K full format.

DE-SQUEEZED RESOLUTION AND DE-SQUEEZED ASPECT RATIO

When you enable anamorphic, both the actual format and the de-squeezed format display at the bottom of the Format
menu. To view the actual format and the de-squeezed format, go to

Menu

>

Settings

>

Project

>

Format

>

Format

.

When anamorphic is enabled, the camera does not crop the sensor image, so the recorded image has the same
resolution and dimensions as the corresponding non-anamorphic format.

After de-squeezing the footage in post production, the resulting footage has a different format than the original
recorded image. The format of the de- squeezed footage is the second format (resolution and aspect ratio) that
displays on the Format menu.

Since the camera does not crop the image, you will have additional horizontal area to frame the image. Then, crop or
scale the footage to the intended aspect ratio.

SHORT-CUT TO INDUSTRY-STANDARD ANAMORPHIC FORMATS

To quickly access industry- standard anamorphic formats, go to

Menu

>

Settings

>

Project

>

Format

>

Anamorphic

. The Anamorphic tab is a short-cut to all of the industry-standard anamorphic formats, so that you can

easily select the most common anamorphic formats.

The Anamorphic tab lists the anamorphic formats for every format with a 6:5, 5:4, or 4:3 aspect ratio.

NOTE:

The Anamorphic tab only lists industry-standard anamorphic formats. To access all of the anamorphic and

non-anamorphic formats, go to

Menu

>

Settings

>

Project

>

Format

>

Format

.

C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC

9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M    

|

   1 2 3

DSMC2 HELIUM OPERATION GUIDE