RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) - Manual (Page 245)

AUX POWER (4-PIN 0B)
The DSMC2 REDVOLT Expander features an auxiliary power out connector.
The LEMO EAG.0B.304.CLN connector supplies unregulated (+) 11.5 to 17 VDC battery pass-through power. The
maximum sustained current draw is 1.5A.
Figure: Front Face of AUX PWR Connector (Looking at the Camera)
LEMO EAG.0B.304.CLN CONNECTOR
PIN SIGNAL DESCRIPTION DIRECTION
1 GROUND Camera Ground N/A
2 GPI General purpose input trigger (GPI), use for trigger in In
3 GPO General purpose output trigger (GPO), use for tally out Out
4 +11.5 to +17 VDC +11.5 to 17 VDC unregulated battery pass-through power Out
NOTE: Mating connector is FGG.0B.304.CLAD.
COMPATIBLE CABLE
790-0552, 790-0652 : RED 4-Pin 0B-to-Flying Lead AUX Power Cable (6')
USB POWER
The following devices feature a USB 2.0 (Type A) power out connector:
DSMC2 Jetpack Expander
DSMC2 V-Lock I/O Expander
DSMC2 REDVOLT Expander
DSMC2 Production Module
The USB power out connector supplies 5 V of power. The maximum sustained current draw is 1.5A.
You can use the USB power out connector to provide power to an attached HDMI wireless transmitter.
NOTE: The USB connector only offers power out, and does NOT support USB communication.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M | 2 4 5
DSMC2 HELIUM OPERATION GUIDE