Gig-e (ethernet)" on, Dsmc2 helium operation guide, Gig-e (ethernet) – RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) User Manual
Page 237: Compatible cables

GIG-E (ETHERNET)
The following devices feature a GIG-E connector.
DSMC2 Jetpack-SDI Expander
DSMC2 REDVOLT Expander
DSMC2 Production Module
The GIG-E 9-pin 0B connector provides a 1000BASE-T (IEEE 802.3ab) gigabit Ethernet connection for remote camera
setup, master/slave camera communication, and external metadata ingest. Since the GIG- E connector does not
support slower speeds (10BASE-T and 100BASE-T), ensure that any device you connect to supports 1000BASE-T.
Figure: Front Face of the GIG-E Connector (Looking at the Camera)
9-PIN 0B GIG-E CONNECTOR
PIN
SIGNAL
DESCRIPTION
DIRECTION
1
BI_DC+
Data pair C+
N/A
2
BI_DC-
Data pair C-
N/A
3
BI_DD+
Data pair D+
N/A
4
BI_DD-
Data pair D-
N/A
5
BI_DA-
Data pair A-
N/A
6
BI_DA+
Data pair A+
N/A
7
BI_DB+
Data pair B+
N/A
8
BI_DB-
Data pair B-
N/A
9
N/A
Do not connect
N/A
NOTE:
Mating connector is FGG.0B.309.CLAD.
COMPATIBLE CABLES
790-0159
: RED GIG-E Straight-to-CAT5E Ethernet Cable (9')
790-0557, 790-0655
: RED GIG-E Right-to-CAT5E Ethernet Cable (9')
790-0163
: Master/Slave Gig-E Cable (4')
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M
|
2 3 7
DSMC2 HELIUM OPERATION GUIDE