RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) - Manual (Page 57)

EXTERNAL RECORD
NOTE: HD-SDI and HDMI ports are only available on select DSMC2 expanders and modules. For more information,
go to "Input/Output Connectors" on page 218 .
NOTE: The secondary LCD/EVF port and an HDMI/MON-1 port cannot be used at the same time. Go to "Monitor
Preferences" on page 88 .
You can record to an external recorder without recording to an SSD. To record to an external device only, follow the
instructions below:
1. Attach a DSMC2 expander or module that has an HD-SDI or HDMI port.
2. Connect the camera to an external recorder with an HD-SDI or HDMI cable.
3. Ensure the SSD is ejected.
4. Set up the HD-SDI or HDMI output:
A. Go to Menu > Monitoring > Monitors and select a monitor.
B. Select Clean from the Mode drop-down menu (otherwise the external recorder records the overlay).
C. Select the output resolution from the Resolution drop-down menu.
NOTE: The HDMI and HD-SDI maximum resolution is 1080p. For more information, go to "Record/Monitor Out
Ports" on page 226 .
5. Disable all False Colors (otherwise the external recorder records the False Colors). For more information, go to
"Tools" on page 94 .
6. If monitoring audio via a third-party monitor that supports audio, set up the monitor mix:
A. Go to Menu > Settings > Audio > Mix > Monitor Mix .
B. Adjust the input channels.
7. Go to Menu > Settings > Recording > Mode .
8. Select External from the Storage drop-down menu.
9. Begin recording.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M | 5 7
DSMC2 HELIUM OPERATION GUIDE