RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) - Manual (Page 180)

SET REEL NUMBER, CAMERA ID, AND CAMERA POSITION
NOTE: Camera ID and Camera Position settings can also be found at Menu > Settings > Project > Slate > Camera .
To prepare media and slate settings for a Master/Slave or Stereo/3D production, follow the instructions below:
1. On both Master and Slave cameras, go to Menu > Media > Device and select Format Media... .
2. On both Master and Slave cameras, select the desired Reel Number and Camera ID settings. The Reel Number
and Camera ID settings on both cameras should match.
3. On the Master camera, change the Camera Position to Left , representing “left eye”.
Figure: Master Settings
4. On the Slave camera, change the Camera Position to Right , representing “right eye”.
5. On both cameras, select Format... to format media and set the Reel Number, Camera ID, and Camera Position
settings.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M | 1 8 0
DSMC2 HELIUM OPERATION GUIDE