RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) - Manual (Page 100)

RACK SHOW DISTANCE
On : Displays the focus distance of each rack point on the Live Action Area when rack focus is enabled. For more
information, go to "Set Up Rack Focus" on page 139 .
Off : Does not display the focus distance of rack points when rack focus is enabled. (Default)
GUIDES
Use the Guides menu to configure the Frame Guide, Action Guide, and Title Guide.
MODE
Off : Disable all guides.
Full : Guide has the same aspect ratio as the record format.
4:3, 16:9, 1.85:1, 1.9:1, 2.4:1 : Guide has the selected aspect ratio.
User : Select an aspect ratio from the drop-down menu that displays when you select this option.
Absolute : Guide is defined by absolute pixel dimensions rather than aspect ratio and scale. When you select
Absolute, the Width/Height fields replace the Scale field.
SCALE
Percentage to scale guide from its maximum possible size. Available range is 0 to 100%.
WIDTH/HEIGHT
The Width/Height fields replace the Scale field when you select Absolute from the Mode drop-down menu. Select the
values for the width and height of the guide in pixels.
OFFSET X/Y
Percentage to offset guide from its default centered position. Available range is –100 to 100%.
100% : Right-aligned (for X offset) and bottom-aligned (for Y offset).
-100% : Left-aligned (for X offset) and top-aligned (for Y offset).
APPEARANCE
Line Style : Select one of the following line styles: Solid, Dashed, or Bracket.
Color : Select the color that has the highest contrast to the scene. The default is White.
Opacity : Set the guide opacity. Available options are 25%, 50%, 75% and 100%.
RELATIVE TO FRAME GUIDE
Select the Relative to Frame Guide check box to size and position the guide relative to (and have it bounded by) the
Frame Guide instead of the record format.
NOTE: The Relative to Frame Guide check box is available on the Action Guide and Title Guide tabs.
Enable/Disable and select the location (Relative To), color, and opacity of the following elements:
Center : The center crosshair. You can select the following shapes: Cross (crosshair), Small Dot, Medium Dot.
Grid : Rule-of-thirds grid.
Shading : The shaded region outside of the area of interest.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M | 1 0 0
DSMC2 HELIUM OPERATION GUIDE