RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) - Manual (Page 70)

LAN INDICATOR
NOTE: The GIG-E port is only available on the DSMC2 ® REDVOLT Expander, DSMC2 Jetpack-SDI Expander, and
DSMC2 Production Module. For more information, go to "Input/Output Connectors" on page 218 .
The LAN indicator shows the current status of an external LAN connection through the Gig-E port.
Grey : External control of the camera is not enabled.
Green : Ethernet is enabled.
WIFI INDICATOR
The WiFi indicator shows the wireless connectivity status.
Grey : Wireless is disabled.
Yellow : Wireless is not connected.
Green : Wireless is enabled.
For more information, go to "Wireless Connection" on page 145 .
POWER STATUS
The Power Status element displays the current supply voltage or remaining battery capacity. Tap the Power Status
element to access the Power menu. For more information, go to
"Power Menu" on page 103 .
DC IN SUPPLY VOLTAGE
When powering the camera via DC power, the current voltage displays. When powering the camera using batteries, the
remaining battery capacity displays. The remaining capacity is indicated by the following colors:
Green : 12.0 V and up
Yellow : 11.8 V to 11.9 V
Red : 11.6 V to 11.7 V
NOTE: The camera turns off automatically if the supply voltage drops to 11.5 V.
BATTERY TIME REMAINING
When using a REDVOLT, REDVOLT-V, or REDVOLT XL battery, the power status displays the location of the power
source and the remaining battery capacity.
The color of the displayed battery capacity represents the amount of time remaining:
Green : >10 minutes
Yellow : 5 to 10 minutes
Red : <5 minutes
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M | 7 0
DSMC2 HELIUM OPERATION GUIDE