RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) - Manual (Page 153)

LENS INFO TAB
The Info tab displays the attached lens mount and lens information.
LENS METADATA TAB
If a supported lens is attached, the camera autopopulates some Lens Metadata fields. You can also manually edit the
Lens Metadata fields to describe the attached lens. The information is stored in the clip metadata. The Lens Metadata
fields are:
Lens Name
Lens Serial Number
Lens Owner
Lens Manufacturer
Lens Min Focal Length
Lens Max Focal Length
Figure: Metadata
MOTION MOUNT TAB
The Motion Mount menu is only accessible when a DSMC RED MOTION MOUNT S35 lens mount is installed. For
more information, see the
RED MOTION MOUNT Operation Guide , available at www.red.com/downloads .
MOTOR CONTROL
To access the Motor Control menu, go to Menu > Settings > Setup > Motor Control .
This menu is only accessible when the RED 3-Axis Lens Control System is attached. Use the Motor Control menu to
set up the RED 3- Axis Lens Control System. For more information, see the
RED 3- Axis Lens Control System
Operation Guide , available at www.red.com/downloads .
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M | 1 5 3
DSMC2 HELIUM OPERATION GUIDE