RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) - Manual (Page 156)

RESTORE SYSTEM
Restore System offers two (2) types of restores: Reset Defaults and Wipe Camera.
RESET DEFAULTS
Reset Defaults changes all settings to the factory default values. To perform a Reset Defaults, follow the instructions
below:
1. Go to Menu > Settings > Maintenance > Restore System .
2. Select Reset Defaults .
3. Select YES on the screen that asks you to confirm the action.
The camera turns off.
4. Turn on the camera.
WIPE CAMERA
Wipe Camera deletes all user settings, including: looks, calibration files, overlays, and presets. Wipe Camera restores
all factory defaults.
1. Go to Menu > Settings > Maintenance > Restore System .
2. Select Wipe Camera .
3. Select YES on the screen that asks you to confirm the action.
The camera turns off.
4. Turn on the camera.
REDISCOVER (HARDWARE REDISCOVER)
Rediscovers all hardware and caches the data for future boot cycles. Perform a Hardware Rediscover if an attached
device or lens mount is not functioning correctly.
To perform a Hardware Rediscover, follow the instructions below:
1. Go to Menu > Settings > Maintenance .
2. Select Rediscover .
3. Select Yes on the screen that asks you to confirm the Hardware Rediscover.
The camera turns off.
4. Turn on the camera.
SYSTEM STATUS
The System Status menu displays key project and system information.
PROJECT STATUS
Displays the current camera and project settings. Includes the following tabs: File Format, Recording, ProRes,
DNxHD/HR, Image, Other.
ATTACHED MODULES
Lists the attached RED modules, lens mount, and expanders.
This screen does not list attached displays and lenses.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M | 1 5 6
DSMC2 HELIUM OPERATION GUIDE