Dsmc2 helium operation guide – RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) User Manual
Page 145

WIRELESS CONNECTION
The camera offers a wireless (802.11g) connection that provides communication support for third-party applications.
The camera uses the RED Command Protocol (R.C.P.) to communicate information between the camera and an
application. As with all wireless devices, the communication range may be affected by the environment and any radio
frequency (RF) interference that may be present. The wireless frequency is 2.4 GHz. For optimal performance, do not
obstruct the antenna with any accessory, mounting plate, or mounting rail.
There are two (2) ways to connect the camera to a device:
Ad-Hoc mode
: The camera and your device connect to each other.
Infrastructure mode
: The camera and your device both connect to an access point, and communicate through
that wireless network.
NOTE:
To connect the camera to an app, the app must have been programmed using the R.C.P. SDK, which is
available through the R.C.P. Development Kit.
NOTE:
The wireless antenna is integrated into the fan grill (top side of camera).
Figure: Do Not Obstruct WiFi Antenna
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M
|
1 4 5
DSMC2 HELIUM OPERATION GUIDE