RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) - Manual (Page 158)

THIRD-PARTY OLPFS
WARNING: RED does not guarantee that third-party OLPFs will work as intended. Any damage caused by using a
third-party OLPF, or any undesirable effects to the footage caused by using a third-party OLPF, is not covered under
any RED warranty. If you have any questions or support issues with a third- party OLPF, contact the OLPF’s
manufacturer.
If you are using a third-party OLPF, follow the instructions below to set up the OLPF:
1. Install the OLPF. For more information, go to "Swap an Interchangeable OLPF" on page 53 .
2. Go to Menu > Settings > Maintenance > OLPF .
3. Select an option from the 3rd Party Emulated Type drop-down menu. This menu lists the RED OLPFs that are
available for the camera. The camera will simulate the color science based on the RED OLPF that you select. RED
DOES NOT guarantee that the third-party OLPF and the camera’s color science will match.
4. Enter a name for the OLPF in the 3rd Party Name field. The name that you enter is for metadata purposes; the
name has no effect on the color science.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M | 1 5 8
DSMC2 HELIUM OPERATION GUIDE