Dsmc2 helium operation guide, Phantom power, Pre-amp gain – RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) User Manual
Page 166
PHANTOM POWER
The 3- pin XLR connectors on the DSMC2 REDVOLT Expander and DSMC2 Production Module provide +48 V
phantom power.
Enable phantom power (via the switch adjacent to the XLR port) after a microphone is connected. Disable phantom
power (by switching to Line or Mic) before removing the microphone.
PRE-AMP GAIN
The range and default depends on the attached expander.
To adjust amplification levels, follow the instructions below:
1. Go to
Menu
>
Settings
>
Audio
>
Control
>
Pre-Amp Gain
.
2. Move the
Pre-Amp
(pre-amplifier) sliders up and down to adjust the amplification levels.
3. To link the amplification for each channel, select
Link
.
Figure: Pre-Amp Gain
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M
|
1 6 6
DSMC2 HELIUM OPERATION GUIDE