beautypg.com

Video monitor outputs, Dsmc2 helium operation guide, Video monitor categories – RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) User Manual

Page 55

background image

VIDEO MONITOR OUTPUTS

NOTE:

HD-SDI and HDMI

®

ports are only available on select DSMC2 expanders and modules. For more information,

go to

"Input/Output Connectors" on page 218

.

The monitoring path converts RAW sensor data to a white balanced 12-bit depth 1920 x 1080 pixel RGB 4:4:4 video
signal. The signal may be modified using ISO, White Balance, or other RGB color space adjustments. The signal is
then scaled and gamma-corrected to provide monitor outputs at 10-bit depth in 4:2:2 YCC or 8-bit depth in 4:4:4
RGB.

The camera offers the following monitor outputs:

EVF/LCD

: Supports a RED EVF or LCD display.

HD-SDI

: Provides a 720p or 1080p output suitable for monitoring or recording to an external VTR or DDR device. It

may be configured for 10-bit LIN (VIDEO) or 10-bit LOG (FILM) encoded data.

HDMI

: Provides a 480p, 720p, or 1080p output suitable for monitoring via a Windows

®

monitor or most HDTVs.

VIDEO MONITOR CATEGORIES

Video monitor outputs are separated into three (3) categories:

VIEWFINDER

: The Upper Status Row, Live Action Area, and Lower Status Row display. Default output is the

EVF/LCD connector located on top of the camera. If an EVF or LCD is not connected, you can transfer the
VIEWFINDER output to either the HDMI or 3G-SDI (HD-SDI) output.

PROGRAM/Clean

: None of the graphic overlays display.

PREVIEW

: The Live Action Area and associated graphic overlays display.

For more information about changing the video monitor category of your monitor, go to

"Monitor Mode" on page 89

.

C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC

9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M    

|

   5 5

DSMC2 HELIUM OPERATION GUIDE