Dsmc2 helium operation guide, Aux power 2-pin 0b, 1.5a, Compatible cable – RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) User Manual
Page 244

AUX POWER 2-PIN 0B, 1.5A
The DSMC2 Jetpack-SDI Expander features an auxiliary power out connector (1.5A):
The 2-Pin 0B connector (LEMO EEG.0B.302.CLL) supplies unregulated (+) 11.5 to 17 VDC battery pass-through power.
The maximum sustained current draw is 1.5A.
Figure: Front Face of AUX PWR Connector (Looking at the Camera)
LEMO EEG.0B.302.CLL CONNECTOR
PIN
SIGNAL
DESCRIPTION
DIRECTION
1
GROUND
Common ground
N/A
2
+11.5 to +17 VDC
+11.5 to 17 VDC unregulated battery pass-through power
Out
NOTE:
Mating connector is FGG.00.302.CLAD35Z.
COMPATIBLE CABLE
790-0410
: RED W.M.D. Power Cable 2-Pin 1B to 2-Pin 0B (18")
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M
|
2 4 4
DSMC2 HELIUM OPERATION GUIDE