Grass Valley K2 Media Client User Manual v3.3 - Manual (Page 64)

64 K2 Media Client User Manual June 5, 2009
Chapter 4 Recording clips
Changing the timecode source
To change the timecode source:
1. Click on the channel whose timecode you want to specify.
2. Select Control | Options . The Options dialog box displays.
3. Select the Timecode tab.
4. Choose a timecode source, then click OK .
Selecting widescreen mode
When recording SD video that is 16:9 aspect ratio, select the widescreen attribute. To
change the Widescreen attribute, select Control | Widescreen.
Timecode Source Description
AncVITC Available on HD channels only. Timecode is read from ancillary VITC.
VITC Timecode is read from the VITC input for the channel.
LTC Available on SD channels only. Timecode is read from the LTC input for the
channel.
AncLTC Available on HD channels only. Timecode is read from ancillary LTC.
Time of Day If using the SD-00 models, the record channel has an internal timecode generator.
When Time of Day is selected, the generator is locked to the Time of Day Source
as currently configured.
Start Time If using the SD-00 models, the record channel has an internal timecode generator.
When Start Time is selected, you can specify the timecode to use when the
recording starts. The drop frame option is enabled when the system timing is set
to the 525 line standard (NTSC). Drop frame timecode allows the generator to
operate as an accurate clock.
T imecode
S ource
T imecode
D isplay