Grass Valley K2 Media Client User Manual v3.3 - Manual (Page 218)

218 K2 Media Client User Manual June 5, 2009
Chapter 12 HD-00: Audio/Video Configuration
Embedded audio setup
To access record channel audio settings, open Configuration Manager, click Channel ,
and select a record channel (R1, R2).
Play channel video setup
NOTE: If you are using a channel suite with channels from multiple K2 Media
Clients, make sure that you have selected a channel from the K2 Media Client that
you want to configure before accessing Configuration Manager.
For this setting... Configure as needed…
Audio input type Embedded Makes settings available as documented in this table.
Number of audio
inputs 2 Makes the following setting(s) available below:
Embedded input group(s): Group 1, Group 2,
Group 3, Group 4.
A1/A2 input format
4 Makes the following setting(s) available below:
Embedded input group(s): Group 1, Group 2,
Group 3, Group 4.
A1/A2, A3/A4 input formats
6 Makes the following setting(s) available below:
Embedded input group(s): Group 1 & 2, Group 3 & 4.
A1/A2 through A5/A6 input formats
8 Makes the following setting(s) available below:
Embedded input group(s): Group 1 & 2, Group 3 & 4.
A1/A2 through A7/A8 input formats
12 Makes the following setting(s) available below:
Embedded input group(s): Groups 1, 2, 3.
A1/A2 through A11/A12 input formats
16 Makes the following setting(s) available below:
Embedded input group(s): Group 1, 2, 3, 4.
A1/A2 through A15/A16 input formats
Embedded input
group(s) Selections available are dependent on “Number of audio inputs” setting above.
A1/A2 input format 16-bit PCM
24-bit PCM
AC-3
Dolby-E
.
.
.
A15/A16 input
format
Timing offset Between -200ms and +200ms. The default value is 0 ms.
Audio Input Tags Add tags for languages or other purposes to this channel’s audio tracks. Refer
to
“Adding audio tags” on page 238 .
Display audio
meters Yes
No Displays meters on the channel pane for audio level
monitoring.