Audio output tags, Display audio meters, Adjusting play speed options – Grass Valley K2 Media Client User Manual v3.3 User Manual
Page 192: Jog speed, Shuttle speed, Var setting, Always start at var preset, Timecode setup, Time of day, Time of day source

192
K2 Media Client User Manual
June 5, 2009
Chapter 10 SDA-00: Audio/Video Configuration
Adjusting play speed options
To access play speed settings, open Configuration Manager and click
Panel
.
Timecode setup
To access timecode settings, open Configuration Manager and click
System
.
“Video reference standard setup” on page 184
for other settings that appear on the System tab.
Audio Output
Tags
Add tags for languages or other purposes to this channel’s audio
tracks. Refer to
“Adding audio tags” on page 238
.
Display audio
meters
Yes
No
Displays meters on the channel pane for audio level
monitoring.
For this setting…
Configure as needed…
Jog speed
-1X to 1X
-1X to 3X
Playback advances or retards one frame at a time according to
the direction of the setting.
Shuttle speed
-16X to 16X
-32X to 32X
Sets the speed for shuttle play or playback.
VAR setting
0.25X
0.50X
0.75X
Variable speed play. Specify the play speed; otherwise, the
speed remains at the preset play speed or the last variable play
speed used.
Always start at
VAR preset
Yes
No
Initial play speed can be set to start at the preset speed.
For this setting...
Configure as needed…
Time of Day
Time of day
source
System Clock
This settings uses the Windows
operating system clock. If you select
this source you should verify that
the clock’s time is correct.
LTC Input
Choose if using LTC timecode.
Makes the following setting(s)
available below:
Time of day LTC source
Time of day
LTC source
R1
R2
Select which channel you want to
use as the Time of Day source.
For this setting...
Configure as needed…