Grass Valley K2 Media Client User Manual v3.3 - Manual (Page 42)

42 K2 Media Client User Manual June 5, 2009
Chapter 3 Using AppCenter
Channels on an SD-00 K2 Media Client
On an SD-00 K2 Media Client, the channels are labeled C1, C2, C3, C4. Each channel
is bi-directional, that is, you can designate the channel to any application available on
the system. Once you designate a channel to run a specific application, the channel
remains the designated application until you change it. You can change the channel’s
application in the Channel monitor.
The following example shows channels on an SD-00 K2 Media Client.
Channels on an SDA-00 or HD-00 K2 Media Client
On an SDA-00 or HD-00 K2 Media Client, the channels are labeled according to their
predetermined application type, for example, Recorder (R1), Player (P1), Player (P2).
Player (P3). Each channel is fixed, that is, the application types that run on that
channel were designated when the machine was built. (For example, a Player channel
can run applications that have play functionality, such as Player, Playlist or
TimeDelay.)
The HD-00 K2 Media Client is configured so that it can accept standard video input
formats as well as HD video input formats of 720p or 1080i. It can convert the video
input into SD or HD video output format.