Grass Valley K2 Media Client User Manual v3.3 - Manual (Page 63)

June 5, 2009 K2 Media Client User Manual 63
Using cue points while recording
Related topics:
• “About using cue points” on page 25 .
• “Using cue points for playback” on page 24 .
Adding a cue point while recording
1. Select Recorder (HD-00 or SDA-00 K2 Media Clients) or Player/Recorder
(SD-00) from the application drop-down list.
2. Begin recording, using one of the methods described in “To record a clip” on
page 59 .
3. In the Record pane, click on the Cue tab. The Cue view displays.
4. While the clip is record mode, use the transport controls to find the desired frame
in the clip, then do one of the following:
• Click the Add Cue button.
• Select Control | Add Cue .
A cue point is added to the cue list using a unique name, e.g. Cue_1.
Removing a cue point
1. While recording, click on the Cue tab.
2. Select a cue point in the list.
3. Do one of the following:
• Click the Remove button, or
• Select Control | Remove .
Renaming a cue point
1. While recording, click on the Cue tab.
2. In Cue view, select a cue point in the list.
3. Select Control | Rename.
4. Use the text entry dialog to enter a new cue name, then click OK or press Enter .