Grass Valley K2 Media Client User Manual v3.3 - Manual (Page 112)

112 K2 Media Client User Manual June 5, 2009
Chapter 6 Working with playlists
Locking a playlist
You can lock a list to prevent changes from being made.
1. Make sure that the list to be locked is selected in the list pane.
2. Open the list properties dialog box, doing one of the following:
• Select the list icon in the event list, then click the Properties button.
• Right-click on the list and select Properties .
3. Click General , then choose the Locked option.
4. Click OK to close. The lock symbol appears.
Setting the playlist timecode
The playlist timecode is displayed in the toolbar. This selection is also used to
generate LTC timecode for the play channel. You cannot stripe the playlist timecode;
however, you can stripe the timecode of the loaded clip. See
“Striping timecode
(replacing the timecode track)” on page 84 .
To select the playlist timecode:
1. Open playlist properties dialog by performing one of the following:
• Click the Properties button.
• Right-click on a list and select Properties .
The List Properties dialog box is displayed.
2. Click Timecode in the properties dialog box.