Data track setup, Record ancillary data, No (profile compatible) – Grass Valley K2 Media Client User Manual v3.3 User Manual
Page 221: Uncompressed vbi lines, Teletext lines, Timecode setup, Time of day, Time of day source, System clock, Ltc input

June 5, 2009
K2 Media Client User Manual
221
Data track setup
Data track setup
To access data track settings, open Configuration Manager, click
Channel
, select a
record channel (R1, R2), and scroll down to locate
Data Track
settings.
Timecode setup
To access timecode settings, open Configuration Manager and click
System
.
For this setting...
Configure as needed…
Record ancillary
data
Yes
When a SD format is selected above and this setting is
selected, it makes the following setting(s) available below:
Record Uncompressed VBI and captioning to data track
No
A data track is not created. Ancillary data packets are not
stored.
Record
Uncompressed
VBI and
captioning to data
track:
Yes
Makes the following setting(s) available below:
If NTSC or PAL:
Uncompressed VBI lines
If PAL:
Teletext lines
Allows VBI information to be recorded onto the data track.
Refer to the
“Data track support on HD channels” on
page 270
for specifications. Media recorded with this setting
is not compatible with Profile XP systems.
No (Profile
compatible)
No VBI information is recorded on the data track.
Media recorded with this setting is compatible with Profile
XP systems.
Uncompressed
VBI lines:
Select up to 5 lines to be recorded onto the data track. A line may be selected as
either Luma or Chroma, but not both. Select Chroma line 13 for Video Indexing.
Teletext lines:
Select up to 5 lines to be recorded onto the data track.
For this setting...
Configure as needed…
Time of Day
Time of day
source
System Clock
This settings uses the Windows
operating system clock. If you select
this source you should verify that
the clock’s time is correct.
LTC Input
Choose if using LTC timecode.
Makes the following setting(s)
available below:
Time of day LTC source
Time of day
LTC source
R1
R2
Select which channel you want to
use as the Time of Day source.
These settings available only on
models with record channels
(HD-12, HD-13, HD-22).
System
This selects the “House LTC” input
on the rear panel as the Time of Day
source.