Grass Valley K2 Media Client User Manual v3.3 - Manual (Page 215)

June 5, 2009 K2 Media Client User Manual 215
Record channel video setup
To access record channel video settings, open Configuration Manager, click Channel ,
and select a record channel (R1, R2).
For this setting... Configure as needed…
Input format a NTSC (SD) or PAL (SD) NTSC or PAL available depending on video
reference standard setting. Selecting a SD
format makes the following setting(s) available
below:
VITC Input
720p Makes the following setting(s) available below:
Compression format:
MPEG:XDCAM-HD422
MPEG:XDCAM-EX
Ancillary data timecode inputs
1080i Makes the following setting(s) available below:
Compression format:
MPEG:XDCAM-HD
MPEG:XDCAM-HD422
MPEG:XDCAM-EX
Ancillary data timecode inputs
Compression
format MPEG Available for all Video input formats. The
HD-00 K2 Media Client is MPEG only.
MPEG:XDCAM-HD Encodes to XDCAM-HD specifications. With
this setting, also configure two or four 16-bit
PCM audio tracks.
Makes the following setting(s) available below:
Recording data rate: 25, 35 Mb/s
MPEG:XDCAM-HD422 Encodes to XDCAM-HD422 specifications.
With this setting, also configure eight 24-bit
PCM audio tracks.
MPEG:XDCAM-EX Encodes to XDCAM-EX specifications. With
this setting, also configure two or four 16-bit
PCM audio tracks.
Long GOP Yes (IBBP…) The GOP structure is IBBPBBPBBPBBPBBP
No (I-frame only) —
Chroma format 4:2:0 When a SD format is selected above and this
setting is selected, it makes the following
setting(s) available below:
Uncompressed VBI line (luma only)
4:2:2 When a SD format is selected above and this
setting is selected, it makes the following
setting(s) available below:
Compress VBI