beautypg.com

Grass Valley K2 Media Client User Manual v3.3 User Manual

Page 295

background image

June 5, 2009

K2 Media Client User Manual

295

FTP

File Transfer Protocol is a common IT protocol for the bulk movement or transfer of
large volumes of data. K2 Media Servers can handle multiple FTP transfers
simultaneously at faster than real-time speeds.

GPI

General Purpose Interface. GPI triggers are physical connections between two pieces
of equipment. Typically GPI triggers are based on a change of state on a monitored
pin of the serial port. For instance you could create a GPI trigger that was operated by
a port on a piece of broadcast equipment.

HD

High Definition video.

internal storage

K2 Media Client models with internal storage access their own internal media storage
drives. Referred to as a stand-alone system. See also direct-connect storage, shared
storage.

iSCSI

Internet SCSI (small computer storage interface) is a storage access protocol that can
use a transport layer such as Gigabit Ethernet rather than be restricted to the short
distances determined by computer hardware buses. K2 Media Servers use iSCSI for
clients that need to deliver media assets with real-time performance. The tuning and
optimizing done by Grass Valley permits the use of iSCSI to deliver unparalleled,
high-throughput, and deterministic performance.

K2 Media Client

A Broadcast Enterprise Server that incorporates IT server platform and storage
technologies. The K2 Media Client can be used with internal, direct-connect, or
shared storage.

Meter Bar

Contains the audio record level controls and signal meters for a channel in AppCenter.

Monitor Pane

Displays the current information for the channel. Displays a thumbnail of the clip
currently loaded in the channel and indicates the current application for the channel.
Contains a drop down menu for changing the channel’s application. For the currently
selected channel, the monitor pane is larger and has a white background.

Non-Drop Frame Timecode

In non-drop frame timecode, all frames are numbered sequentially, but the ending
timecode of a program does not accurately give the program's length. Drop frame
timecode yields precise running times, but frames are not all numbered sequentially.
A frame number must be dropped periodically to keep the clock right.

This manual is related to the following products: