Grass Valley K2 Media Client User Manual v3.3 - Manual (Page 217)

June 5, 2009 K2 Media Client User Manual 217
Record channel audio setup
Record channel audio setup
On the HD-00 K2 Media Client, available settings change depending on the audio
input selected, as in the following sections:
• “AES/EBU audio setup”
• “Embedded audio setup”
AES/EBU audio setup
To access record channel audio settings, open Configuration Manager, click Channel ,
and select a record channel (R1, R2).
For this setting... Configure as needed…
Audio input type AES/EBU Makes settings available as documented in this table.
Number of audio
inputs 2 Makes the following setting(s) available below:
A1/A2 input format
4 Makes the following setting(s) available below:
A1/A2 input format
A3/A4 input format.
A1/A2 input format 16-bit PCM
24-bit PCM
AC-3
Dolby-E
A3/A4 input format
Timing offset Between -200ms and +200ms. The default value is 0 ms.
Audio Input Tags Add tags for languages or other purposes to this channel’s audio tracks. Refer
to
“Adding audio tags” on page 238 .
Display audio
meters Yes
No Displays meters on the channel pane for audio level
monitoring.