Default generated afd values – Grass Valley K2 Media Client User Manual v3.3 User Manual
Page 266

266
K2 Media Client User Manual
June 5, 2009
Appendix B Specifications
Default generated AFD values
Default AFD values are generated when the three following conditions are met:
• The AFD output setting in the Configuration Manager is set to
always
• The clip does not have AFD in the data track, and
• The clip does not have AFD specified in its clip properties
Under these conditions, default AFD is generated and inserted, based on ARC
performed and the source material format. Default generated AFD settings are
described in the table below.
This manual is related to the following products: