Grass Valley K2 Media Client User Manual v3.3 - Manual (Page 47)

June 5, 2009 K2 Media Client User Manual 47
Configuring a channel for remote control
3. If if is not already displayed, select the Control tab.
4. Select the desired protocol and remote settings, and click OK . If using VDCP
protocol to perform video network transfers, you must set up the video network and
the Controller ID. Refer to the K2 Media Client System Guide.
NOTE: The protocol control port is pre-set and cannot be modified.
5. Test the system and recheck settings, if required.
Protocol Mode Description
Local only Allows you to monitor the record or play channel
operations and view clip information locally only.
There is no control from any external device.
Remote only Allows you to monitor the record or play channel
operations and view clip information only using
remote protocol. All control comes from the
external device. The buttons, menu items, and
other interface controls are disabled. You can
select this mode by choosing the
Remote only
option in the Options dialog box
Local and Remote Allows you to control the record or play channel
locally as well as remotely. You can select this
mode by choosing
Remote and Local in the
Options dialog box.