Grass Valley K2 Media Client User Manual v3.3 - Manual (Page 54)

54 K2 Media Client User Manual June 5, 2009
Chapter 4 Recording clips
6 View tabs These tabs toggle between Control view and Cue Points view.
7 Application For SDA-00 and HD-00 K2 Media Clients, this indicates whether the
pane is set to none or to a Recorder.
For an SD-00 K2 Media Client, a drop-down list allows you to select
between none, Playlist or the Player/Recorder application. If the
Player/Recorder application is selected, you can play or record using
the pane controls.
8 Time Dome
Progress
Only
This multi-function indicator displays either record progress only, or
available storage and record progress. The Time Dome also indicates
when the record channel is in Continuous Record mode.
Available storage is estimated using the amount of free disk space and
the video compression settings for the channel.
The record progress indicator makes one revolution every 10 seconds
in normal record, or one revolution during a fixed length recording.
To change the Time Dome function, right-click the Time Dome, then
choose an application from the pop-up menu.
Available
Storage
Available
Storage and
Continuous
Record Mode
9 Length Select the Length control to enter the clip length, then choose record.
Recording continues until you choose stop or the specified length is
reached.
10 Meter bar button Displays the Meter bar which contains the audio record level controls
and signal meters. Changes to the audio level are saved for the
channel.
Control Description and User Operation
Control
Cue