Grass Valley K2 Media Client User Manual v3.3 - Manual (Page 60)

60 K2 Media Client User Manual June 5, 2009
Chapter 4 Recording clips
Scheduling a recording
This feature is part of the licensable AppCenter Pro option.
You can schedule a recording to start at a specified time. (Scheduled Start Time uses
Time of Day, not LTC or VITC.) To schedule a start time for a clip to play, see
“Scheduling a clip to play” on page 80 .
1. Select Control | Schedule Start Time . Trigger At entry box appears.
2. Enter the time when you want the recording to start and click OK . The time of day,
trigger time, and a countdown are displayed.
Using Fixed Length record mode
You can specify the clip length before recording, or during recording. Fixed length
recording continues until the clip length is reached or until you select stop.
1. Verify video, audio, and other settings for your recording as explained in “Before
you record: Recorder settings checklist” on page 58 .
2. Select Length in the Recorder pane.
The Length dialog box appears.
3. Enter the clip length by typing only numbers, colons are added automatically.
4. Choose OK in the dialog box, or press Enter .
5. Select the record button on the onscreen transport controls .
Recording continues until Stop is selected or the desired length is reached. While
recording, the mark in and mark out update with the current status of the clip. The
Time Dome gives a visual indication of the percent complete as well as a
countdown from the specified length down to
00:00:00:00 .