Grass Valley K2 Media Client User Manual v3.3 - Manual (Page 220)

220 K2 Media Client User Manual June 5, 2009
Chapter 12 HD-00: Audio/Video Configuration
Play channel audio setup
To access play channel audio settings, open Configuration Manager, click Channel ,
and select a play channel (P1, P2).
Adjusting play speed options
To access play speed settings, open Configuration Manager and click Panel .
a.
For information on HD/SD up and down conversions, see “Aspect ratio conversions on HD-00 models”
on page 265 .
b.
Still-Play mode settings determine how to generate the still-play signal for the play channel when it is
setup to freeze on last frame of video in stop mode. You can select interpolated or interlaced.
c.
Refer to “Changing the timecode source” on page 18
For this setting... Configure as needed…
Embedded output
group(s) None
Groups 1, 2, 3, 4
Timing offset Between -200 ms and +200 ms. The default is 0 ms.
Audio Output
Tags Add tags for languages or other purposes to this channel’s audio
tracks. Refer to
“Adding audio tags” on page 238 .
Display audio
meters Yes
No Displays meters on the channel pane for audio level
monitoring.
For this setting… Configure as needed…
Jog speed -1X to 1X
-1X to 3X Playback advances or retards one frame at a time according to
the direction of the setting.
Shuttle speed -16X to 16X
-32X to 32X Sets the speed for shuttle play or playback.
VAR setting 0.25X
0.50X
0.75X Variable speed play. Specify the play speed; otherwise, the
speed remains at the preset play speed or the last variable play
speed used.
Always start at
VAR preset Yes
No Initial play speed can be set to start at the preset speed.