Channel applications overview, Selecting a channel application, Available channel applications – Grass Valley K2 Media Client User Manual v3.3 User Manual
Page 43

June 5, 2009
K2 Media Client User Manual
43
Channel applications overview
The following example shows channels on an HD-00 K2 Media Client.
Channel applications overview
AppCenter channels have applications for performing essential tasks. When
AppCenter starts, each channel comes up in its last used application. For the SD-00
K2 Media Client, you can change the channel application. (SDA-00 and HD-00 K2
Media Client systems are set at the factory to run in pre-determined input or output
channels.)
Selecting a channel application
To change channel applications, in the monitor pane, select the channel application
drop-down list
for the channel, then choose an application.
The selected application replaces the current application and appears in the channel’s
space in the channel pane. The channel becomes the selected channel.
Available channel applications
The K2 Media Client provides Playlist, Player/Recorder (SD-00 K2 Media Client) or
Player and Recorder applications (HD-00 and SDA-00 K2 Media Clients) to run on
a channel. AMP, BVW, and VDCP remote protocol applications are configured on
each channel under
Control | Options
.
NOTE: Additional channel applications, such as K2 TimeDelay, are available. For
more information, consult the Grass Valley website www.thomsongrassvalley.com.