Grass Valley K2 Media Client User Manual v3.3 - Manual (Page 55)

June 5, 2009 K2 Media Client User Manual 55
Guide to using the Recorder/Player application: Control view
Recorder Menu Load Clip– Opens the Load Clip dialog box. (Only available on the
SD-00 K2 Media Client)
New Clip – Used to create and name clip prior to starting the
recording. If a clip is already loaded, selecting New Clip ejects the
current clip and creates a new one.
Preview – Used to load the current clip in a play channel for playback
while the clip is still recording. After record is started, select Preview
to load the clip into the next available play channel, then select Play.
(Only available on the HD-00 and SDA-00 K2 Media Clients.)
Schedule Start Time – Opens the Trigger At entry box so a start time
can be entered.
Locate – Locates the currently loaded clip in the Clips pane.
Properties – Opens the Properties dialog for the currently loaded
clip.
Options – Opens the Record channel options dialog box.
Widescreen – Sets the channel for recording widescreen format.
(720p and 1080i clips recorded on the HD-00 K2 Media Client are
always in widescreen, whether this is selected or not.)
Auto Subclips– The auto subclip check box changes the way that the
subclip mode behaves. When it is NOT checked, clips have to be
accepted manually. When it is checked, a subclip will be created as
soon as you set a mark out. (Only available on the SD-00 K2 Media
Client.)
E-to-E (LoopThru) mode – This menu item available on SD-00 and
HD-00 models. When selected, the following occurs: “EE” is
displayed on the channel pane, next to the Timecode Source
indicator; when no clip is loaded, the signal that is currently present
at the channel input plays out; when a record operation stops the clip
remains in the Recorder. The signal that is currently present at the
channel input plays out.
E to E – This menu item available on SDA-00 models. When
selected, the output video and audio switches to the record channel
input when the play channel is stopped or when no clip is loaded. If
not selected, the output freezes on the last frame of video. If you are
using E-to-E, you must connect a video reference signal to prevent
playback instability.
Control Description and User Operation