H3C Technologies H3C S10500 Series Switches User Manual

Page 42

[MCE1] ip vpn-instance vpn1

[MCE1-vpn-instance-vpn1] route-distinguisher 1:2

[MCE1-vpn-instance-vpn1] vpn-target 1:2

[MCE1-vpn-instance-vpn1] quit

# Create VPN instance vpn2 for VPN 2, and configure an RD for it.

[MCE1] ip vpn-instance vpn2

[MCE1-vpn-instance-vpn2] route-distinguisher 1:3

[MCE1-vpn-instance-vpn2] vpn-target 1:3

[MCE1-vpn-instance-vpn2] quit

# Bind VLAN-interface 10 and Tunnel 0 with VPN instance vpn1, and configure IP addresses for the
VLAN interface and tunnel interface.

[MCE1] vlan 10

[MCE1-vlan10] port gigabitethernet 1/0/10

[MCE1-vlan10] quit

[MCE1] interface vlan-interface 10

[MCE1-Vlan-interface10] ip binding vpn-instance vpn1

[MCE1-Vlan-interface10] ip address 10.214.10.1 24

[MCE1-Vlan-interface10] quit

[MCE1] interface tunnel 0

[MCE1-Tunnel0] ip binding vpn-instance vpn1

[MCE1-Tunnel0] ip address 10.1.1.1 24

# Bind VLAN-interface 11 and Tunnel 1 with VPN instance vpn2, and configure IP addresses for the

VLAN interface and tunnel interface.

[MCE1] vlan 11

[MCE1-vlan11] port gigabitethernet 1/0/11

[MCE1-vlan11] quit

[MCE1] interface vlan-interface 11

[MCE1-Vlan-interface11] ip binding vpn-instance vpn2

[MCE1-Vlan-interface11] ip address 10.214.20.1 24

[MCE1-Vlan-interface11] quit

[MCE1] interface tunnel 1

[MCE1-Tunnel1] ip binding vpn-instance vpn2

[MCE1-Tunnel1] ip address 10.1.2.1 24

[MCE1-Tunnel1] quit

•

Configurations on MCE 2

# Create VPN instance vpn1 for VPN 1, and configure the same RD as that configured on MCE 1 for the

VPN instance.

system-view

[MCE2] ip vpn-instance vpn1

[MCE2-vpn-instance-vpn1] route-distinguisher 1:2

[MCE2-vpn-instance-vpn1] vpn-target 1:2

[MCE2-vpn-instance-vpn1] quit

# Create VPN instance vpn2 for VPN 2, and configure the same RD as that configured on MCE 1 for the
VPN instance.

[MCE2] ip vpn-instance vpn2

[MCE2-vpn-instance-vpn2] route-distinguisher 1:3

[MCE2-vpn-instance-vpn2] vpn-target 1:3