H3C Technologies H3C S10500 Series Switches User Manual

Page 340

329

[SPE1] route-policy hope permit node 0

[SPE1-route-policy] if-match ip-prefix hope

[SPE1-route-policy] quit

[SPE1] bgp 100

[SPE1-bgp] ipv4-family vpnv4

[SPE1-bgp-af-vpnv4] peer 1.1.1.9 upe route-policy hope export

Configure SPE 2

# Configure MPLS basic capability and MPLS LDP to establish LDP LSPs.

system-view

[SPE2] interface loopback 0

[SPE2-LoopBack0] ip address 3.3.3.9 32

[SPE2-LoopBack0] quit

[SPE2] mpls lsr-id 3.3.3.9

[SPE2] mpls

[SPE2-mpls] quit

[SPE2] mpls ldp

[SPE2-mpls-ldp] quit

[SPE2] interface vlan-interface 12

[SPE2-Vlan-interface12] ip address 180.1.1.2 24

[SPE2-Vlan-interface12] mpls

[SPE2-Vlan-interface12] mpls ldp

[SPE2-Vlan-interface12] quit

[SPE2] interface vlan-interface 11

[SPE2-Vlan-interface11] ip address 172.2.1.2 24

[SPE2-Vlan-interface11] mpls

[SPE2-Vlan-interface11] mpls ldp

[SPE2-Vlan-interface11] quit

# Configure the IGP protocol, OSPF, for example.

[SPE2] ospf

[SPE2-ospf-1] area 0

[SPE2-ospf-1-area-0.0.0.0] network 3.3.3.9 0.0.0.0

[SPE2-ospf-1-area-0.0.0.0] network 172.2.1.0 0.0.0.255

[SPE2-ospf-1-area-0.0.0.0] network 180.1.1.0 0.0.0.255

[SPE2-ospf-1-area-0.0.0.0] quit

[SPE2-ospf-1] quit

# Configure VPN instances vpn1 and vpn2.

[SPE2] ip vpn-instance vpn1

[SPE2-vpn-instance-vpn1] route-distinguisher 600:1

[SPE2-vpn-instance-vpn1 ] vpn-target 100:1 both

[SPE2-vpn-instance-vpn1] quit

[SPE2] ip vpn-instance vpn2

[SPE2-vpn-instance-vpn2] route-distinguisher 800:1

[SPE2-vpn-instance-vpn2] vpn-target 100:2 both

[SPE2-vpn-instance-vpn2] quit

# Configure SPE 2 to establish MP-iBGP peer relationship with UPE 2 and to inject VPN routes, and
specify UPE 2.

[SPE2] bgp 100