H3C Technologies H3C S10500 Series Switches - Manual (Page 168)

157
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 35/48/74 ms
The sample output shows that CE 1 and CE 2 can reach each other.
7. Verify the configuration
Perform the display mpls lsp verbose command on PE 1. The output shows that an LSP with LspIndex
2050 is established using RSVP-TE, meaning that the LSP is an MPLS TE tunnel.
[PE1] display mpls lsp verbose
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
No : 1
IngressLsrID : 2.2.2.2
LocalLspID : 1
Tunnel-Interface : Tunnel1
Fec : 3.3.3.3/32
Nexthop : 10.0.0.2
In-Label : NULL
Out-Label : 1024
In-Interface : ----------
Out-Interface : Vlan-interface2
LspIndex : 2050
Tunnel ID : 0x22004
LsrType : Ingress
Bypass In Use : Not Exists
BypassTunnel : Tunnel Index[---]
Mpls-Mtu : 1500
------------------------------------------------------------------
LSP Information: BGP LSP
------------------------------------------------------------------
No : 2
VrfIndex : vpn1
Fec : 192.168.1.0/24
Nexthop : 192.168.1.1
In-Label : 1024
Out-Label : NULL
In-Interface : ----------
Out-Interface : ----------
LspIndex : 8193
Tunnel ID : 0x0
LsrType : Egress
Outgoing Tunnel ID : 0x0
Label Operation : POP
------------------------------------------------------------------
LSP Information: LDP LSP
------------------------------------------------------------------
No : 3