beautypg.com

Troubleshooting mpls te, No te lsa generated – H3C Technologies H3C S10500 Series Switches User Manual

Page 170

background image

159

Troubleshooting MPLS TE

No TE LSA generated

Symptom:
OSPF TE is configured but no TE LSAs can be generated to describe MPLS TE attributes.
Analysis:
For TE LSAs to be generated, at least one OSPF neighbor must reach the FULL state.
Solution:

1.

Perform the display current-configuration command to check that MPLS TE is configured on

involved interfaces.

2.

Perform the debugging ospf mpls-te command to observe whether OSPF can receive the TE LINK

establishment message.

3.

Perform the display ospf peer command to check that OSPF neighbors are established correctly.