Binding a bgp vpls instance, Configuring mac address learning, Configuring vpls instance attributes – H3C Technologies H3C S10500 Series Switches User Manual
Page 182

171
Binding a BGP VPLS instance
Operations for binding a BGP VPLS instance are the same as those for binding an LDP VPLS instance (see
“
”).
Configuring MAC address learning
Follow these steps to configure the MAC address learning function:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter VSI view
vsi vsi-name —
Enable or disable MAC address
learning for the VPLS instance
mac-learning { enable | disable }
Optional
Enabled by default
Configuring VPLS instance attributes
Follow these steps to configure VPLS instance attributes:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter VSI view
vsi vsi-name —
Specify the encapsulation type of
the VPLS instance
encapsulation { bgp-vpls | ethernet
| vlan }
Optional
vlan by default, which
corresponds to the VSI PW
encapsulation type of tagged.
Set the description of the VPLS
instance
description text
Optional
No description set by default.
Shut down the VPLS service of the
VPLS instance
shutdown
Optional
By default, the VPLS service of a
VPLS instance is enabled.
Specify a tunneling policy for the
VPLS instance
tnl-policy tunnel-policy-name
Optional
By default, no tunneling policy is
specified for a VPLS instance and
a VPLS instance uses the default
tunneling policy. The default
tunneling policy selects only one
tunnel in this order: LSP tunnel,
CR-LSP tunnel.