H3C Technologies H3C S10500 Series Switches - Manual (Page 273)

262
Redistributing the loopback interface route and OSPF routes
into BGP
Follow these steps to redistribute the loopback interface route and OSPF routes into BGP:
To do… Use the command… Remarks
Enter system view system-view —
Enter BGP view bgp as-number Required
Enter BGP VPN instance view
ipv4-family vpn-instance
vpn-instance-name
Required
Redistribute direct routes into BGP
(to redistribute the loopback
interface route into BGP)
import-route direct [ med
med-value | route-policy
route-policy-name ] *
Required
Redistribute OSPF VPN routes
import-route ospf [ { process-id |
all-processes } [ allow-direct | med
med-value | route-policy
route-policy-name ] * ]
Required
Creating a sham link
Follow these steps to create a sham link:
To do… Use the command… Remarks
Enter system view system-view —
Enter OSPF view
ospf [ process-id | router-id
router-id | vpn-instance
vpn-instance-name ] *
—
Configure the route tag route-tag tag-value Required
Enter OSPF area view area area-id Required
Configure a sham link
sham-link source-ip-address
destination-ip-address [ cost cost |
dead dead-interval | hello
hello-interval | retransmit
retrans-interval | trans-delay delay
| simple [ cipher | plain ]
password | { md5 | hmac-md5 }
key-id [ cipher | plain ]
password ]*
Required
By default, no sham link is
configured.