H3C Technologies H3C S10500 Series Switches User Manual

Page 337

326

system-view

[CE2] interface vlan-interface 13

[CE2-Vlan-interface13] ip address 10.4.1.1 255.255.255.0

[CE2-Vlan-interface13] quit

[CE2] bgp 65420

[CE2-bgp] peer 10.4.1.2 as-number 100

[CE2-bgp] import-route direct

[CE2] quit

Configure UPE 2

# Configure MPLS basic capability and MPLS LDP to establish LDP LSPs.

system-view

[UPE2] interface loopback 0

[UPE2-Loopback0] ip address 4.4.4.9 32

[UPE2-Loopback0] quit

[UPE2] mpls lsr-id 4.4.4.9

[UPE2] mpls

[UPE2-mpls] quit

[UPE2] mpls ldp

[UPE2-mpls-ldp] quit

[UPE2] interface vlan-interface 11

[UPE2-Vlan-interface11] ip address 172.2.1.1 24

[UPE2-Vlan-interface11] mpls

[UPE2-Vlan-interface11] mpls ldp

[UPE2-Vlan-interface11] quit

# Configure the IGP protocol, OSPF, for example.

[UPE2] ospf

[UPE2-ospf-1] area 0

[UPE2-ospf-1-area-0.0.0.0] network 172.2.1.0 0.0.0.255

[UPE2-ospf-1-area-0.0.0.0] network 4.4.4.9 0.0.0.0

[UPE2-ospf-1-area-0.0.0.0] quit

[UPE2-ospf-1] quit

# Configure VPN instances vpn1 and vpn2, allowing CE 3 and CE 4 to access UPE 2.

[UPE2] ip vpn-instance vpn1

[UPE2-vpn-instance-vpn1] route-distinguisher 300:1

[UPE2-vpn-instance-vpn1] vpn-target 100:1 both

[UPE2-vpn-instance-vpn1] quit

[UPE2] ip vpn-instance vpn2

[UPE2-vpn-instance-vpn2] route-distinguisher 400:2

[UPE2-vpn-instance-vpn2] vpn-target 100:2 both

[UPE2-vpn-instance-vpn2] quit

[UPE2] interface vlan-interface 12

[UPE2-Vlan-interface12] ip binding vpn-instance vpn1

[UPE2-Vlan-interface12] ip address 10.1.1.2 24

[UPE2-Vlan-interface12] quit

[UPE2] interface vlan-interface 13

[UPE2-Vlan-interface13] ip binding vpn-instance vpn2

[UPE2-Vlan-interface13] ip address 10.3.1.2 24